The piece rate wage system pays a worker for what they make. The time rate system pays for the hours they work. Both are common in garment factories, and the choice between them shapes cost per piece, quality, worker earnings and how a supervisor spends the day. A factory that picks the wrong one for its floor ends up paying for output it does not get, or losing good operators to a factory that pays better for speed.

This guide explains how each system works, how a piece rate is set from the SMV of an operation, and what happens to cost per piece when efficiency changes. A worked example with assumed figures shows the difference clearly. It also covers hybrid schemes, the legal point about minimum wage, and the mistakes that cause trouble.
What time rate pay is
Under time rate pay, the worker gets a fixed amount for a unit of time, such as a month, a day or an hour. The amount does not change with how many garments the worker makes in that time. Most operators in Bangladeshi ready made garment factories are on a monthly wage tied to a grade, with overtime on top. Our guide on overtime pay in a garment factory shows how the hourly rate is worked out.
How it feels on the floor. The worker knows what they will earn. The factory knows its labour cost for the month before the month starts. Pay does not rise when output rises, so the push for output comes from supervision, targets and any separate incentive.
What the piece rate wage system is
Under the piece rate wage system, pay is linked to the number of pieces or operations completed. Each operation has a rate. The worker earns the rate multiplied by the number of good units made.
How it feels on the floor. The worker has a direct reason to work fast, because every extra piece is extra pay. The factory’s labour cost per piece is fixed, because it pays the same amount each time. But the worker’s earnings swing with output, material supply and machine breakdowns.
How a piece rate is set from SMV
Good piece rates are not guessed. They come from the standard minute value of the operation, which you can read about in our guide on how to calculate standard allowed minutes.
The steps are:
- Decide the target earning for a worker who performs at the expected level.
- Work out the standard minutes that worker should produce in a month. This is the working minutes in a month multiplied by the expected efficiency.
- Divide the target earning by the standard minutes. This gives a rate per standard minute.
- Multiply the rate per standard minute by the SMV of each operation. This is the piece rate for that operation.
Piece rate per piece = rate per standard minute × SMV of the operation
A worked example
The figures are assumed. Replace them with your own.
- Target earning for an operator at the expected level: 8,500 taka per month
- Working days: 26, at 8 hours (480 minutes) a day
- Expected efficiency: 60 percent
- SMV of the operation, say attaching a collar: 0.45 minutes
Step 1: working minutes in a month
26 × 480 = 12,480 minutes
Step 2: standard minutes produced at 60 percent
12,480 × 0.60 = 7,488 standard minutes
Step 3: rate per standard minute
8,500 ÷ 7,488 = 1.135 taka
Step 4: piece rate for the operation
1.135 × 0.45 = 0.511 taka per piece
What different efficiencies mean
Here is what happens to the operator and the factory when the operator works at three different efficiencies.
| Efficiency | Pieces a month | Piece rate earning | Time rate earning | Cost per piece, piece rate | Cost per piece, time rate |
|---|---|---|---|---|---|
| 45 percent | 12,480 | 6,375 | 8,500 | 0.511 | 0.681 |
| 60 percent | 16,640 | 8,500 | 8,500 | 0.511 | 0.511 |
| 75 percent | 20,800 | 10,625 | 8,500 | 0.511 | 0.409 |
Read the table in two ways.
- For the worker: under piece rate, earnings move with output, from 6,375 to 10,625. Under time rate they stay at 8,500.
- For the factory: under piece rate, the cost per piece stays at 0.511. Under time rate, the cost per piece falls from 0.681 to 0.409 as efficiency rises. Time rate favours the factory when efficiency is high and punishes it when efficiency is low. Piece rate removes that swing.
Note that at 45 percent efficiency, the piece rate worker earns 6,375 taka, which may be below the minimum wage. That brings up the next point.
The minimum wage and legal points
Workers on a piece rate must still receive at least the legal minimum wage for the work they do. A factory that uses piece rates needs a guaranteed minimum: if the piece rate earning falls below the minimum wage for a grade, the factory tops it up. Check the wage structure, the Labour Act and your buyer’s code of conduct before you use piece rates. Buyers audit this, and unpaid top ups are a common finding.
Our article on minimum wage and cost per piece scenarios shows how wage changes feed into cost per piece. Overtime for piece rate workers needs its own method. Settle it with HR and write it down.
Advantages and disadvantages
Time rate
| Advantages | Disadvantages |
|---|---|
| Stable, predictable pay for the worker | No direct reward for speed |
| Simple to run, with little paperwork | Supervisors must push for output |
| Workers can take care over quality | Cost per piece rises when efficiency drops |
| Suits training, rework and varied jobs | Slow workers and fast workers earn the same |
| Easy to match to legal minimum wage rules | Needs targets and checks to hold output |
Piece rate
| Advantages | Disadvantages |
|---|---|
| Direct link between effort and pay | Worker income is unstable |
| Fixed labour cost per piece | Quality may fall as speed rises |
| Less supervision of speed | Needs accurate counting and records |
| Rewards skilled, fast operators | Can cause conflict when work is short or uneven |
| Helps cost control and quotation | Rates must be revised when methods change |
When each system fits
Time rate fits when:
- The work is varied or changes often, such as short runs and many style changes.
- Quality is critical and speed must not override care.
- Operators are new and still learning. Our article on the sewing operator learning curve explains why output in the first days is low.
- Support jobs have no clear output count, such as helpers, checkers or store staff.
Piece rate fits when:
- Operations are repeated, stable and easy to count.
- Each operation has a reliable SMV.
- Quality is tracked at the operator level, so poor work can be traced and repaired.
- Orders are long enough that rates do not need constant revision.
Hybrid schemes: time rate plus incentive
Many factories mix the two. The worker gets a basic time rate wage, and an incentive is paid on top for output above a set level. This keeps the stability of time rate and adds a push for productivity.
A common design is:
- A base wage that covers the legal minimum and the grade.
- A target efficiency, such as 60 or 65 percent.
- An incentive that grows in steps above the target.
- A quality gate, so that the incentive is cut if rejects pass a set level.
Our guide on sewing operator incentive scheme design explains how to build one, and the article on grading and assessing operators shows how grades fit in.
What you need to run piece rates properly
Piece rates only work with good records.
- Reliable SMVs for every operation, checked by time study and method study.
- Counting at the operator level. Bundle tickets with coupons, or barcode scanning, record who made what. See our guide to the bundle ticket in a garment factory.
- Quality records. Only good pieces should be paid. Rejects need to be traced back to the operator.
- Rate review rules. When the method, machine or fabric changes, the SMV and the rate change.
- Clear communication. Workers should know how the rate was set and how to check their pay.
For real time counting of output, see our article on real time production tracking on the sewing floor.
Effects on quality and teamwork
Piece rates can push people to rush. Look for these signs.
- Skipped stitches, loose threads and uneven seams rise.
- Operators choose easy bundles and leave the hard ones.
- Operators hide defects to avoid deductions.
- Sharing of work and helping a slow neighbour stops.
Time rate has its own risks. Output can drift down, and good workers feel that slow workers are rewarded as much as they are.
Whatever the system, the line needs inline checks and a clear repair process. Our guide on sewing defects and their root causes helps find where the quality problems begin.
Common mistakes
- Setting rates without SMV. A rate based on guesswork will be too high for easy operations and too low for hard ones.
- Forgetting the guaranteed minimum. Workers must not fall below the legal wage.
- Not revising rates after a method change. An improved method cuts the SMV, and the rate should follow. Equally, a new harder fabric needs a higher rate.
- Paying for pieces, not good pieces. Rejects must not be paid.
- Mixing systems without a clear rule. If part of the line is on piece rate and part on time rate, bottlenecks will form.
- Ignoring the pay for waiting time. If material is late, piece rate workers earn nothing through no fault of their own. Decide how this is paid.
Final thoughts
The piece rate wage system gives a fixed cost per piece and a direct reward for speed. Time rate gives stable pay and room for quality, but cost per piece rises when efficiency falls. In our example, the same operator cost 0.511 taka per piece under piece rate at every efficiency, while the time rate cost moved from 0.681 to 0.409.
For most garment lines, a hybrid of base wage plus incentive works well. Whichever you choose, set rates from real SMVs, keep honest counting and quality records, and make sure that no worker falls below the legal minimum.
Frequently asked questions
It is a system where a worker is paid for each unit or operation completed, not for time worked. The worker earns the piece rate multiplied by the number of good pieces made.
Time rate pays a fixed amount for a period of time, such as an hour, a day or a month, whatever the output.
Divide the target monthly earning by the standard minutes the worker should produce in a month, which gives a rate per standard minute. Multiply this rate by the SMV of the operation to get the piece rate.
It depends on the work. Piece rate suits stable, repeated, countable operations. Time rate suits varied work, training and quality critical jobs. Many factories use a basic time rate with an incentive on top.
Yes. Pay must not fall below the legal minimum wage for the grade, so factories using piece rates need a guaranteed minimum. Confirm the rules with your compliance team.
It can, because workers speed up and may skip care. Control it with inline checks, tracing of rejects to the operator, and paying only for good pieces.
A hybrid pays a base wage as time rate and adds an incentive for output above a target. The worker has a stable minimum and a reward for extra output.
