Tag: Winding

No comments

Flow Chart of Spinning Finishing Section

  By

In the spinning mill, after making yarn the others process is called finishing. Yarn faults remove; color mix check, a right shape of yarn package and many others work done by this section. That’s why it is a very important section.

Flow Chart of Spinning Finishing Section

Flow of spinning finishing section is started with Spinning=>Yarn in cop package=>Winding=>Yarn in cone package=>checking under ultraviolet light=>Conditioning (Heat seat) =>Weight determination=>Packing and finally=>Delivery to buyer

Flow chart of Spinning Finishing section

Flow Chart of Spinning Finishing Section

*Auto coner winding machine try to remove all kinds of yarn fault. Gives right weight and shape of yarn cone package

*Ultraviolet light use to check others color mixing, contamination in yarn

Written by

A.M. Amirul Islam (Washim)

Facebook: Amirul Islam Washim
E-mail: [email protected]

If you like this article please do not forget to share on facebook and put your valuable comments.

One Comment

Objects of winding

  By

What are the objects of winding?

Winding

Winding is the process of transferring yarn or thread from one type of package to another to type of package. Winding is one of the most important operation in textile sector. It is mainly done in spinning mill. Rewinding is also an important operation in fabric manufacturing factory.

objects of winding

Winding of yarn

Types of winding

According to winding way:

There are basically two types of winding. They are

  1. Precision winding
  2. Non precision winding

Precision Winding

The winding process in which yarn is laid close together in a parallel or near parallel manner is called precision winding. Maximum amount of yarn storing is possible by this system.

Non precision Winding

The winding process by which yarn is laid in helix angled way so that the layers cross one another and give stability to the package is called non precision winding. These types of winding package are more stable than precision winding package.

According to package winding can be classified as:

  • Pirn winding
  • Pool winding
  • Cop winding
  • Cone winding
  • Cheese winding
  • Flanged winding

Objectives of winding

  1. To transfer yarn from one package to another package.
  2. To remove faults like hairiness, neps, slubs, foreign matters.
  3. Improve the quality of yarn.
  4. Reduce the end breakage.
  5. Improve productivity.
  6. To store the yarn in suitable package.
  7. To get required package of yarn.

Requirements of winding

  • Minimum fault
  • No damage of yarn
  • Easy unwinding
  • Suitable size and shape
  • Correct tension
  • Cheap cost of package

Faults during winding:

  • Breakage of yarn during winding
  • Variation of twist
  • Improper shaped winding
  • Dirty packages
  • Hairiness package
  • Poor unwinding
  • Softer or harder winding package in great rate etc.

By

Engineer Sheikh Nurja

B.Sc engineer of textile

Merchandiser at buying house

If you like this article please do not forget to share on facebook and put your valuable comments.