Flow Chart of Spinning Finishing Section

In the spinning mill, after making yarn the others process is called finishing. Yarn faults remove; color mix check, a right shape of yarn package and many others work done by this section. That’s why it is a very important section.

Flow Chart of Spinning Finishing Section

Flow of spinning finishing section is started with Spinning=>Yarn in cop package=>Winding=>Yarn in cone package=>checking under ultraviolet light=>Conditioning (Heat seat) =>Weight determination=>Packing and finally=>Delivery to buyer

Flow chart of Spinning Finishing section

Flow Chart of Spinning Finishing Section

*Auto coner winding machine try to remove all kinds of yarn fault. Gives right weight and shape of yarn cone package

*Ultraviolet light use to check others color mixing, contamination in yarn

Written by

A.M. Amirul Islam (Washim)

Facebook: Amirul Islam Washim
E-mail: [email protected]

If you like this article please do not forget to share on facebook and put your valuable comments.

Flow Chart of Compact Yarn

Flow Chart of Compact Yarn

Compact Yarn is made by cotton fiber. The compact spinning is a process where a fiber strand drawn by drafting system is condensed before twisting it. The compact yarn is produced with maximum strength and Breaking elongation. Compact yarn reduced hairiness due to additional condensing zone in the drafting system. That’s why there high capital cost in compact spinning. But it eliminates using wax in the winding.

The flow of compact yarn is followed by the following steps

Mixing=>Blow-room=>Carding=>Pre drawing=>Lap forming=>Combing=>Post Drawing=>Roving=>Compact spinning=>Winding (Auto coner)

flow chart of compact yarn

Flow Chart of Compact Yarn

Written by

A.M. Amirul Islam (Washim)

Facebook: Amirul Islam Washim
E-mail: [email protected]

If you like this article please do not forget to share on facebook and put your valuable comments.