Operation Breakdown, SMV and Layout of Blouse Manufacturing

Operation Breakdown, SMV and Layout of Blouse Manufacturing

A blouse is worn by the women in South Asian, it is worn in the upper part of a body. As per this sewing operation bulletin, total SMV is 4.73 and 25 sewing machine will be needed. Here also available downloadable excel sheet for your clarification. Hopefully, after reading this you will have a good idea of Operation Breakdown, SMV and Layout of Blouse Manufacturing.

Operation Breakdown, SMV and Layout of Blouse Manufacturing
NO OPERATION M/C Type Attach. M/C TGT MAN LAY
Foots S.M.V LVL OUT
FRONT PART
1 Front Two part O/L 3T O/L 0.1 600 0.53 1
2 Front two-part joint S/N 0.15 400 0.79 0.5
3 Btn placket making mark & Make S/N 0.25 240 1.32 1
4 Ticken Mark at back part Helper 0.15 400 0.79 1
5 Ticken tack at back part S/N 0.16 375 0.85 1
6 Solder joint 5T O/L 0.15 400 0.79 1
7 Slv rolling S/N 0.25 240 1.32 1
8 Slv joint 5T O/L 0.3 200 1.59 2
9 Side joint 5T O/L 0.2 300 1.06 1
10 Hanger loop, Btn loop measure & Cut Helper 0.22 273 1.16 1
11 Hanger loop tack S/N 0.15 400 0.79 1
12 Btn loop Make & joint S/N 0.2 300 1.06 1
13 Neck tape joint with body S/N 0.45 133 2.38 2
14 Neck top stt. S/N 0.35 171 1.85 2
15 Front Hem tape joint with body S/N 0.5 120 2.64 3
16 Back Hem tape joint with body S/N 0.3 200 1.59 2
17 Back Hem tape Top stt. S/N 0.2 300 1.06 1
18 Front Hem tape Top stt. S/N 0.45 133 2.38 2
19 Tack at underarm S/N 0.1 600 0.53 0.5
20 Main lbl joint S/N 0.1 600 0.53 0.5
TOTAL     4.73 0.19 25 25
  GRAND TOTAL     4.73 0.19 25 25

Summary of Sewing Operation Bulletin of  Blouse Manufacturing

Man & M/C REQUIREMENT
NO MACHINE TYPE REQ
1 S/N 18
2 D/N
3 O/L
4 3T O/L 1
5 4T O/L
6 5T O/L 4
7 2T F/L (Chain)
8 Button Attach
9  F/L
10 F/O/A
11 Ironman
12 Helper 2
13 Chain stc
14 O/L (Chain)
15 Buttonhole
16 KANSAI
TOTAL 25

Here,

  • S/N Single needle lock stitch
  • D/N Double needle lock stitch
  • O/L Overlock machine
  • 3T O/L 3 Thread overlock machine
  • 4T O/L 4 Thread overlock machine
  • 5T O/L 5Thread overlock machine
  • F/L Flat Lock machine
  • F/O/A Feed of the arm

Operation Breakdown, SMV and Layout of Blouse Manufacturing

Blouse Operation Bulletin (excel)

Written by

A.M. Amirul Islam (Washim)
Email: [email protected]

Linkedin: A.M. Amirul Islam

Operation Breakdown, SMV and Layout of Jacket Manufacturing

Operation Breakdown, SMV and Layout of Jacket Manufacturing

A jacket is not an easy product to produce in sewing section, lots of complex operation in it.  As per this Operation bulletin total SMV is 44.97, 73 sewing machines needed and manpower should be 75. This content would help you to know about Operation breakdown, SMV and Layout of woven Jacket manufacturing of sewing what given in below. In this article, we are going to share details of Operation Breakdown, SMV and Layout of Jacket Manufacturing.

Operation Breakdown, SMV and Layout of Jacket Manufacturing

Operation Breakdown, SMV and Layout of Jacket Manufacturing1

Operation Breakdown, SMV and Layout of Jacket Manufacturing
NO OPERATION M/C Type Attachments M/C TGT MAN LAY Seam Length
Foots S.M.V LVL OUT
HOOD               
1 Hood panel joint (shell) S/N 0.8 75 1.33 1
2 Hood panel 1/4 T/S D/N 0.75 80 1.25 1
3 Inner side Hood panel joint(sherpa) S/N 0.7 86 1.17 1
4 Facing jnt with lining psn at hood mouth opening S/N 0.9 67 1.5 1
5 Hood mouth opening ruling S/N 0.5 120 0.83 1
6 Hood placket mark for make & decoration Helper 0.9 67 1.5 1
7 Hood placket  make & decoration S/T S/N 0.85 71 1.42 1
8 Hood mark for 4 points snap button attach Helper 0.4 150 0.67 1
9 Hood mouth opening 1/16 T/S S/N 0.7 86 1.17 1
10 Hood eye hole 2 points for dawcode insert Buttonhole 0.55 109 0.92 1
Front & back part lining              
11 Lining 2 part middle joint S/N 0.65 92 1.08 1
12 Hanger loop make & joint at back neck S/N 0.5 120 0.83 1
13 Patch label iron & Bon Fusing IRON 0.8 75 1.33 1
14 Lining back yoke joint S/N 0.7 86 1.17 1
15 Patch & main label joint S/N 0.95 63 1.58 2
16 Inner chest pocket & side H/pocket facing joint S/N 0.6 100 1 0.5
17 Inner chest pkt bone mark Helper 0.35 171 0.58 0.5
18 Inner chest pkt bone make D/N 0.35 171 0.58 1
19 Inner chest pkt  bone cutt & turn Helper 0.35 171 0.58 1
20 Inner chest pkt bone 1/16 T/S (upper & lower) S/N 0.75 80 1.25 1
21 Inner front panel joint S/N 0.85 71 1.42 1
22 Inner front panel 1/16 T/S S/N 0.9 67 1.5 0.5
23 Lining sleeve panel joint S/N 0.75 80 1.25 0.5
Front part (shell)              
24 Front side H/pocket Mark & bone mark for snp btn attach Helper 0.5 120 0.83 1
25 Front side H/pocket bone make D/N 0.8 75 1.33 1
26 Front H/pkt bone cutt& turn Helper 0.75 1 1.25 1
27 Front H/pkt bone 1/16 T/S (upper) S/N 0.6 100 1 2
28 Front H/pkt bone 1/16 T/S (Lower) S/N 0.6 100 1 1
29 Front  H/pkt bone decoration S/T S/N 0.55 109 0.92 1
30 Twill tap joint chest & waist psn S/N 0.85 71 1.42 1
31 Shoulder tap & slv cuff tap iron IRON 0.5 120 0.83 1
32 shoulder tap & slv cuff tap make & 1/16 T/S S/N 0.07 857 0.12 1
34 Shoulder jnt & tap jnt with shoulder psn S/N 0.5 120 0.83 1
Back part shell              
35 Back part middle 2 part joint S/N 0.85 71 1.42 1
36 Back part middle 2 part 1/16 T/S S/N 1 60 1.67 2
37 Faching jnt at wist psn ( inside) D/N 0.6 100 1 1
38 Faching attach at bk lower middle psn S/N 0.4 150 0.67 1
Assembly part              
39 Shoulder jnt (Lining) S/N 0.4 150 0.67 1
40 Sleeve jnt (Lininig) S/N 0.8 75 1.33 1
41 Side seam jnt (Lining) S/N 0.9 67 1.5 1
42 Sleeve panel jnt (Shell) S/N 1 60 1.67 2
43 Sleeve panel 1/16 T/S (shell) S/N 1 60 1.67 2
44 Sleeve jnt (Shell) S/N 0.85 71 1.42 1
45 Armhole 1/4 T/S D/N 0.8 75 1.33 1
46 Hood joint S/N 1 60 1.67 2
47 Hood neck 1/16 T/S S/N 0.75 80 1.25 1
48 Side joint (Shell) S/N 0.9 67 1.5 2
49 Placket mark Helper 0.6 100 1 2
50 Placket make & 1/16 T/S S/N 0.9 67 1.5 2
51 Placket with zipper jnt S/N 0.7 86 1.17 1
52 Zipper jnt (Right side) S/N 0.7 86 1.17 1
53 Zipper jnt (Left side) D/N 0.7 86 1.17 1
54 Mark for snp btn 18 points Helper 0.8 75 1.33 1
55 Punch &attach  for snp btn 18 points Button Attach 1 60 1.67 2
56 Sleeve cuff with elastick jnt S/N 0.6 100 1 1
57 Lining slv with cuff joint S/N 0.7 86 1.17 1
58 Sleeve mouth opening rulling S/N 0.6 100 1 1
59 Mark for grumet attach at front & bk mdl drawcode unsert psn Helper 0.5 120 0.83 1
60 Punch & attacg 4 points Grumet psn at waist SNAP BTN 0.6 100 1 1
61 Shell & lining joint with front opening psn ( right) S/N 0.75 80 1.25 1
62 Shell & lining joint with front opening psn ( Left) S/N 0.75 80 1.25 1
63 1/4 T/S psn at front opening psn S/N 0.7 86 1.17 1
64 Faching jnt with btm hem (insid) S/N 0.9 67 1.5 1
65 Back btm slit cut T/S S/N 0.45 133 0.75 1
66 Btm hem S/N 0.5 120 0.83 1
TOTAL     44.97 0.6 75 73

Summary of Operation bulletin, SMV and Layout of woven Jacket manufacturing

NO MACHINE TYPE REQ
1 S/N- Single needle lock stitch 52
2 D/N- Double needle lock stitch 6
3 O/L- Overlock machine
4 3T O/L- 3 thread Overlock machine
5 4T O/L- 4 thread Overlock machine
6 5T O/L- 5 thread Overlock machine
7 2T F/L (Chain)- Flat lock machine
8 Button Attach 2
9  F/L- Flat lock machine
10 F/O/A- Feed of the arm
11 IRON 2
12 Helper   10
13 Chain stc
14 O/L (Chain)
15 Button hole 1
16 SNAP BTN 1
17 KANSAI
TOTAL 73

Written by

A.M. Amirul Islam (Washim)
Email: [email protected]

Linkedin: A.M. Amirul Islam